Kyocera TASKalfa 6003i Operation Manual page 446

Setup and Registration (System Menu) > System Menu
Item
VNC (RFB)
Wi-Fi Direct
Wi-Fi
Wired Network
VNC (RFB) over SSL
Wi-Fi Direct
Wi-Fi
Wired Network
Enhanced VNC over SSL
Wi-Fi Direct
Wi-Fi
Wired Network
REST
Wi-Fi Direct
Wi-Fi
Wired Network
This is set when starting up a VNC Viewer (E.g. RealVNC) to use the Remote
*1
Operation.
The default port number is 9062.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
This is set when starting up a VNC Viewer (E.g. RealVNC) to use Remote Operation
*1, *2
protected by SSL.
The default port number is 9063.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Set whether to enable this function for each network.
Value: Disable, Enable
This is set when starting up Command Center RX to use Remote Operation protected
*1, *2
by SSL.
The default port number is 9061.
Value: Off, On
NOTE
• The default setting is [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is
the self-certificate of the machine.
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to communicate using REST.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
8-62
Description
*1