Kyocera TASKalfa 6003i Operation Manual page 565

Troubleshooting > Troubleshooting
Message
Perform Tone Curve
Adjustment in the
System Menu.
Performing Drum
Refresh...
Preparing to print.
R
Message
Regulating the
temperature...
Remove originals in
the document
processor.
Replace all originals
and press [Continue].
Running security
function...
S
Message
Scanner memory is
*1
full.
Scheduled sending
jobs exceeded.
Checkpoints
Over long periods of use, the
effects of the ambient
temperature and humidity can
cause output hues to vary
slightly.
—
—
Checkpoints
―
Are there any originals left in the
document processor?
—
—
Checkpoints
—
—
10-45
Corrective Actions
Run [Tone Curve Adjustment].
The machine is under the
adjustment to maintain its
quality. Please wait.
The machine is under the
adjustment to maintain its
quality. Please wait.
Corrective Actions
The machine is under the
adjustment to maintain its
quality. Please wait.
Remove originals from the
document processor.
Remove originals from the
document processor, put them
back in their original order, and
place them again. Select
[Continue] to resume printing.
Select [Cancel] to cancel the
job.
Running security function.
Please wait.
Corrective Actions
Scanning cannot be performed
due to insufficient memory of the
scanner. Follow the instructions
on the screen.
The number of jobs has
exceeded the limit set for
delayed transmission. Select
[End]. The job is canceled.
Wait until the delayed
transmission is executed, or
cancel the delayed transmission
and then perform the job again.
Reference
Page
page 10-54
—
—
Reference
Page
―
―
—
—
Reference
Page
—
—