Kyocera TASKalfa 6003i Operation Manual page 180

Preparation before Use > Registering Destinations in the Address Book
The Folder (SMB) Address
"Host Name", "Path", "Login User Name" and "Login Password" [Change] > Enter the
information > [OK]
NOTE
For the computer name, share name, domain name, and user name, enter the information
that you noted when you created the shared folder. For details on creating shared folders,
refer to the following:
Preparation for Sending a Document to a Shared Folder in a PC (page 3-22)
The table below explains the items to be entered.
Item
*1
Host Name Computer name
Path Share name
For example: scannerdata
If saving in a folder in the shared folder:
share name\folder name in shared folder
Login User If the computer name and domain name are the
*2
Name same:
User Name
For example: james.smith
If the computer name and domain name are different:
Domain name\User name
For example: abcdnet\james.smith
Login Password Login password
(Case sensitive.)
*1 You can also specify the port number. Enter the following format separated by a colon.
"Host name: port number" or "IP address: port number"
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10]:445)
If the port number is not specified in [Host Name], the default port number is 445.
*2 When sending a document through an optional network interface (IB-50 or IB-51), "\"
cannot be used. If the computer name is different from the domain name, login user name
needs to be input by using "@."
(Example: james.smith@abcdnet)
To search for a folder on a PC on the network, select "Search Folder from Network" or "Search
Folder by Host Name" [Next].
If you selected "Search Folder from Network" [Next], you can search all PCs on the network
for a destination.
If you pressed "Search Folder by Host Name" [Next], you can enter the "Domain/Workgroup",
and "Host Name" to search PCs on the network for the destination.
A maximum of 500 addresses can be displayed. Select the host name (PC name) that you
want to specify in the screen that appears, and select [Next]. The login user name and login
password entry screen appears.
After you enter the login user name and login password name of the destination PC, the
shared folders appear. Select the folder that you want to specify and select [Next]. The
address of the selected shared folder is set.
Select the folder from the Search Results list.
Description
3-37
Max. No. of
Characters
Up to
262 characters
Up to
260 characters
Up to
64 characters
Up to
128 characters