JLG E600J Operation And Safety Manual page 49

2. Generator Enable Control (if equipped)
This switch allows the operator to prevent the
generator engine from starting to charge the
batteries when using the machine indoors.
3. Drive Orientation Override
When the boom is swung over the rear tires
or further in either direction, the Drive Orien-
tation indicator will illuminate when the drive
function is selected. Push and release the
switch, and within 3 seconds move the Drive/Steer control
to activate drive or steer. Before driving, locate the black/
white orientation arrows on both the chassis and the plat-
form controls and match the control direction arrow to the
intended chassis direction.
3121710
SECTION 3 - MACHINE CONTROLS AND INDICATORS
4. Drive/Steer
The DRIVE joystick provides for
driving either forward or back-
ward. The controller is 'ramped' to
allow variable drive speed.
Steering is controlled by a thumb
operated switch on top of the joystick.
5. Telescope Control
This switch allows extension and retraction of
the main boom.
6. Lights (If Equipped)
This switch operates accessory light packages
if the machine is so equipped.
7. Jib Lift (If Equipped)
This switch controls the raising and lowering
of the jib (up or down).
3-7