Table of Contents
Advertisement
Problem
The water comes out of the
cavity embossment.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
14. ENERGY EFFICIENCY
14.1 Product information for hob according to EU 66/2014
Model identification
Type of hob
Number of cooking zones
Heating technology
Diameter of circular cooking
zones (Ø)
Energy consumption per cook‐
ing zone (EC electric cooking)
Energy consumption of the hob (EC electric hob)
Possible cause
There is to much water in
the cavity embossment.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
CIB6740ACB
CIB6740ACM
Hob inside Freestanding Cooker
4
Induction
Left front
Left rear
Right front
Right rear
Left front
Left rear
Right front
Right rear
ENGLISH
Remedy
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re‐
fer to "Activating the Steam
Bake function".
21.0 cm
14.0 cm
18.0 cm
18.0 cm
171.4 Wh/kg
176.4 Wh/kg
171.2 Wh/kg
166.2 Wh/kg
171.3 Wh/kg
37
Advertisement
Table of Contents
