Table of Contents
Advertisement
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch
until
comes on for all zones. Set the
heat setting in 4 seconds. You can
operate the hob. When you deactivate
the appliance the function operates
again.
6.12 OffSound Control
(Deactivation and activation
of the sounds)
Deactivate the hob. Touch
seconds. Touch
comes on. Touch
choose one of the following:
•
- the sounds are off
•
- the sounds are on.
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
6.13 Power management
function
• All cooking zones are connected. See
the illustration.
7. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable
cookware.
Cookware material
for 4 seconds
for 3
for 3 seconds.
or
of the timer to
you can
• The hob and both ovens are
connected to one phase.
• The phase has a maximum electricity
load.
• The function divides the power in the
appliance. The oven is more
important than the hob.
• The function activates when the total
electricity load in the appliance is
exceeded.
• The function reduces the power of the
cooking zones to prevent a circuit
overload.
• The heat setting display of the
reduced zones changes between two
levels.
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
ENGLISH
15
Advertisement
Table of Contents
