Service and Repair Manual
Information
It is forbidden to handle the connector locking device on the pump side.
Only use the lock on the harness side to connect the 10-pin connector 6.
u Run the system for 30 min to confirm successful priming and leak-free operation.
Specific values
Not applicable.
Tightening specifications
Refer to standard tightening torques.
page 264.)
KD62V12 33525088601_7_1 EN_US
2021-07
(For more information see: 5.3 Standard tightening torques,
© 2021 by Kohler Co. All rights reserved.
Repair
Exhaust aftertreatment system
255