Kohler KD62V12 Service And Repair Manual page 156

Repair
Exhaust gas system
Tightening specifications
Fig. 177: Admission pipes
1 221AA
2 221AB
Tab. 37: Tightening specifications table
*Lubricants:
MG = Molykote G-n-plus
MW = Castrol Optimol paste white T
MH = Molykote HSC
O = Engine oil
XX = Loctite 243
YY = Loctite 577
**Refer to screws reuse rules.
marking, page 264.)
3.8.2 Exhaust pipes to turbocharger removal and installation
Previous tasks
q Disconnect application set exhaust system.
156
Key Screw specifications
EN 1664 M10x1,5-10.9-FLZN
EN 1665 M8x1.25x25-8.8-FLZN
(For more information see: 5.3.2 Screws pre-tightening, reuse and
© 2021 by Kohler Co. All rights reserved.
Service and Repair Manual
Torque
± 5%
- Yes 1 35 Nm
26 ft-lb
- Yes 1 25 Nm
18 ft-lb
KD62V12 33525088601_7_1 EN_US
Angle (°)
± 5°
- -
- -
2021-07