Kohler KD62V12 Service And Repair Manual page 219

Service and Repair Manual
Overview
Fig. 245: Task overview
1 Thermostat
2 Thermostat housing
3 Screw (M12)
4 O-ring
Removal
u Remove two screws 3 diametrically opposed.
u Place guiding rods in place of the two screws 3.
u Remove remaining screws 3 and screws 6.
u Remove thermostat housing 2.
u Remove guiding rods.
u Remove thermostats 1.
u Remove pipe 8 with flange 5.
Installation
u Assemble pipe 8 and flange 7 with o-rings 4, 7.
u Insert o-rings 7 on coolant pump inlet.
u Position pipe assembly on coolant pump inlet.
u Position thermostats 1 in thermostats housing 2.
KD62V12 33525088601_7_1 EN_US
2021-07
5
6
7
8
© 2021 by Kohler Co. All rights reserved.
Flange
Screw (M10)
O-ring
Pipe
Repair
Cooling system
219