Kohler KD62V12 Service And Repair Manual page 191

Service and Repair Manual
u Install o-ring 18 on flange 17.
u Assemble pipe 19 with flange 17.
u Screw assembly with screws 16.
u Assemble oil centrifuge base 7 and oil centrifuge 1 with screws 8 and o-rings 2, 3.
u Install holders 10 with screws 11.
u Install oil centrifuge assembly to oil pan with o-ring 12 and screws 4, 9.
u Install pipe 13 to oil centrifuge base 7 with o-ring 6 and screws 4.
u Connect flange joints 14, 15 to pipe 13.
u Install cover plate 5 with o-ring 6 and screws 4.
Specific values
Not applicable.
Tightening specifications
Fig. 215: Oil centrifuge screws
1 025AA
Tab. 43: Tightening specifications table
*Lubricants:
MG = Molykote G-n-plus
MW = Castrol Optimol paste white T
MH = Molykote HSC
O = Engine oil
XX = Loctite 243
YY = Loctite 577
KD62V12 33525088601_7_1 EN_US
2021-07
Key Screw specifications
ISO 4017 M8x1.25x40-10.9-FLZN
© 2021 by Kohler Co. All rights reserved.
Torque
± 5%
- Yes 1 27 Nm
20 ft-lb
Repair
Lubricating system
Angle (°)
± 5°
- -
191