Connecting Projector; Terminals Of Projector - Christie 103-008100-01 User Manual

CONNECTING PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer
to the figures on pages 12 to 14 and connect properly.
COMPUTER AUDIO INPUT 1/
AUDIO MONITOR OUTPUT
JACK
This terminal is switchable and
can be used as Computer
Audio Input 1 or Audio Monitor
Output (variable).
Set up the terminal as either
Computer Audio Input 1 or
Audio Monitor Output properly
before using this terminal.
(See pages 13, 24.)
Note: This terminal does not
output audio from INPUT 3.
USB CONNECTOR (Series B)
When controlling a computer
with the remote control of this
projector, connect USB terminal
of your personal computer to
this terminal. (See page 13.)
RESET BUTTON
This projector uses a micro
processor to control the unit, and
only occasionally, this micro
processor may malfunction and
need to be reset. This can be done
by pressing the RESET button with
a pen, which will shut down and
restart the unit. Do not use the
RESET function excessively.
5 BNC INPUT JACKS
Connect component video
output (Y, Cb, Cr or Y, Pb, Pr)
from video equipment to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks or connect computer
output (5 BNC Type [Green,
Blue, Red, Horiz. Sync, and
Vert. Sync.]) from computer to
G, B, R, H/V, and V jacks.
(See pages 13–14.)
12

TERMINALS OF PROJECTOR

COMPUTER INPUT/MONITOR
OUTPUT TERMINAL (ANALOG)
This terminal is switchable and
can be used as Computer Input
or Monitor Output. Set up the
terminal as either Computer Input
or Monitor Output properly before
using this terminal.
(See pages 13–14, 24.)
Note: This terminal outputs from the
5 BNC type computer input on
INPUT 2 jacks only.
VIDEO INPUT JACKS
Connect composite video
output from video equipment
to VIDEO/Y jack or connect
component video outputs to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks. (See page 14.)
COMPUTER INPUT
TERMINAL (DIGITAL)
Connect a computer output
(Digital DVI-D type) to this
terminal.
The HD (HDCP Compatible)
signal can also be connected.
(See page 13.)
When using the Wired/Wireless
remote control as wired,
connect the Wired remote
control to this jack with a
remote control cable (optional).
When controlling a computer
with the remote control of this
projector, connect the mouse
port of your personal computer
to this connector. (See page
13.)
AUDIO INPUT JACKS
Connect an audio output
from video equipment to
these jacks. (See page
14.)
COMPUTER AUDIO
INPUT 2 JACK
Connect an audio
output (stereo) from a
computer to this jack.
(See page 13.)
R/C JACK
CONTROL PORT CONNECTOR
S-VIDEO INPUT JACK
Connect S-VIDEO
output from video
equipment to this
jack. (See page 14.)