Adjustable Feet; Installing Projector In Proper Position - Christie 103-008100-01 User Manual

PREPARATION
Projection angle can be adjusted up to 10.5 degrees with the

ADJUSTABLE FEET.

1 Lift the front of the projector and pull the FEET LOCK
LATCHES in each side of the projector.
2 Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE
FEET to a proper height, and tilt.
3 To retract the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK
LATCHES.
Keystone distortion of the projected image can be
corrected by the Menu Operation. (See pages 22, 38.)
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
10˚
10˚
NO SIDEWAYS
10
ADJUSTABLE FEET

INSTALLING PROJECTOR IN PROPER POSITION

Do not tilt the projector more than 10 degrees from side to side.
Do not put the projector on either side to project an image.
ADJUSTABLE FEET FEET LOCK
LATCHES