Table of Contents
Advertisement
WPS-765-DOM-AH Installation Manual
6.4.2.7.
IR OPTIMIZER
This feature allows IR lighting to be set correctly for any install. Light from outside
the IR range may be blended to optimize lighting around the outer edges of
the screen or turn off IR when the lighting is not consistent enough to reliably
switch between Day & Night mode. Settings in this menu only affect night mode
operation with IR enabled.
Menu Structure and Settings
• OFF — Deactivate IR optimization.
• ON — Enter the sub-menu to change advanced IR optimization settings.
• MODE — Select between AUTO and CENTER modes:
• AUTO — Uses the entire scene for calculating IR optimization.
• CENTER — Enter the advanced IR AREA menu to set where on the screen
IR is sensed for making adjustments.
• IR AREA — Set the area for IR LED illumination from the top, bottom, left and
right. Weight customization allows one area to become more illuminated
than another.
• LEVEL — Set the IR LED intensity for all LEDs.
• IR LED — Set the IR LED activation mode.
• OFF — Deactivate LEDs at all times.
• DAY/NIGHT — Allows the IR LEDs to activate as needed. Enter the sub-
menu to change advanced settings:
• LEVEL MIN — Sets the lowest value for IR optimization.
• LEVEL MAX — Sets the highest value for IR optimization.
• FIX — Manually forces IR to stay on.
• LEVEL — Sets lowest/highest value for IR optimization.
• COLOR NIGHT — Set to ON and enter the sub-menu to change the COLOR
GAIN when the viewing area is darkened, but bright enough for color to be
picked up.
• IR SHADE COMP — Reduces the dark corners of the viewing area by
bleeding in IR LED illumination from the rest of the image. Turn the feature
ON and enter the sub-menu to change.
• PATTERN — Selects the dimensions of the area to be selected for IR
Shade Compensation.
• POSH — Sets the horizontal position for IR Shade Compensation.
• POSV — Sets the vertical position IR Shade Compensation.
• LEVEL — Sets lowest/highest value for IR optimization.
20
Advertisement
Table of Contents
