Communication; Language; Version - Wirepath Surveillance WPS-765-DOM-AH Installation Manual

Table of Contents

6.4.2.15. COMMUNICATION

Set the RS485 communication protocols within this submenu to match the

protocols from the DVR.

• PROTOCOL — Scroll left or right to select a communication protocol - PELCO-D

or PELCO-P. Wirepath devices use Pelco-D.

• ADDRESS — Scroll left or right to select a unique ID number from 0 to 225 to

identify the camera on the RS485 loop.

Note— Each device in the RS485 connection MUST be set to a unique address

number for proper RS-485 communication.

• BAUDRATE — Scroll left or right to choose a baud rate for RS485 communication

between the camera and controller. Baud rate options include 4800, 9600,

19200, 38400, and 57600.

Note— ALL devices in the RS485 connection must be set to the same baud rate

for proper RS-485 communication.

• DATABIT — 8

• PARITY — OFF

• STOPBIT — 1

Select one of 7 language options—English, Spanish, Russian, German,

Portuguese, French, and Japanese.

To view the version of firmware currently running on the camera, select VERSION.

COMMUNICATION

PROTOCOL

ADDRESS

BAUDRATE

DATABIT

PARITY

STOPBIT

RETURN

WPS-765-DOM-AH Installation Manual

PELCO-D

050

4800

8BIT

OFF

1BIT

Table of Contents