Installing Windows 7 From Usb 3.0 Drives - IEI Technology INOX-F15C-ULT3 User Manual

INOX-F15C-ULT3 Stainless Panel PC

3.9 Installing Windows 7 from USB 3.0 Drives

Microsoft Windows 7 installation media does not include native driver support for USB 3.0,
so during installation, a keyboard/mouse connected to a USB 3.0 port does not respond.
The Windows 7 USB 3.0 Creator Utility automates the steps to update a Windows 7
installation image so that it contains USB 3.0 drivers. To install Windows 7 from a USB
drive onto the INOX-F15C-ULT3, please follow the steps described below.
Step 1: Create a USB flash drive installer. Use your Windows 7 DVD or ISO image to
create a bootable USB flash drive. Instructions on how to do are found on
Microsoft's
Step 2: Download and unzip the
on the Admin system.
Step 3: Connect the USB device containing the Windows 7 image to the Admin system.
Step 4: Right-click the file "Installer_Creator.exe" and select Run as administrator.
Step 5: Browse to the root of the USB drive.
Step 6: Click "Create Image" to begin the creation process.
Step 7: Wait for the process to finish. It can take up to 15 minutes.
Step 8: Using the updated installer, proceed with the Windows 7 installation as you
normally would.
website.
Windows 7 USB 3.0 Creator utility to a temporary folder
Page 27