语言/Language; Factory Reset - RGBlink Q4L User Manual

Load From
Load saved scene from SCENE 1-10.
System Setting
SN: to check serial number of the device.
SCALE/BLACK Button:Choose the exact function for this composite button. If choose SCALE, pushing
this button will open up SCALE menu.
If choose BLACK, pushing this button will black out selected layer.
Software Version: check comm board version, input EXT, 4K input module, 4K FPGA, 4K Video, output ext module
1and output ext module 2,button module.
Technical Support: contact information of sales and after sales service
Network setting: Mac address and DHCP ON/OFF, IP Address, Subnet Mask, Gateway setting take effect after the
device is rebooted.
Fan Speed: Adjust the speed via button.
3.3.4 Language
To switch language here. English or Chinese available.

3.3.5 Factory Reset

If Factory Reset is selected, the interface will show warning, confirm by pushing knob, cancel by push any other
key.
Q4L/Q4L-4K
Load From
SCENE 5
Button on is ready to recall
Button flashes means current scene
SN
SCALE/BLACK Button
Software Version
Technical Support
Network Setting
Fan Speed
User Manual
XXXX
>>
>>
>>
>>
23