Assembly Instructions - First Degree Fitness E350 User Manual

Assembly Instructions

STEP 1
Installing the Rower Monitor
REQUIRED
M10x60 Bolt
M10 Dome Nut
CAUTION
Do not over tighten.
The Monitor needs to be
adjustable for different
viewing angles.
a) Remove M10x60 Bolt and M10 Dome Nut.
b) Attach the Rower Monitor to the Monitor Stalk using the
M10x60 Bolt and M10 Dome Nut.
M10 Dome Nut
c) Locate the Heart Rate and Speed Sensor Wires as shown.
d) Connect the Heart Rate and Sensor Wires.
e) Push the wiring inside the rear of the console as shown.
Speed
Sensor
wire
9
M10x60 Bolt
Heart
Rate
Wire