Table of Contents
Advertisement
Assembly Instructions
STEP 1
Main Frame Assembly Instructions
REQUIRED
4 x M8 x 15mm Blots [19]
1
4 x M8 Spring Washers [17]
2
3 x Foot Levelers [12]
12
CAUTION
8
The Control Arm is heavy and
may swing freely during this
stage of assembly. The
Adjuster Knob is pre-tightened
from the factory in the optimal
position for assembly in relation
to the Control Arm. Do not
loosen the Adjuster Knob until
the Telescoping Tube has been
safely secured to the underside
of the Control
Arm.
STEP 2
Slider Arm Kit Installation Instructions
REQUIRED
2 x Handle Lock Knobs [8]
1
2 x M12 Washer [9]
2 x Plastic Spacer [10]
Slider Arm Assembly Left [6]
Slider Arm Assembly Right [7]
3mm Allen Key [11]
Note: Slider Arms are
marked „L‟ and „R‟.
Improper installation will
result in uneven Slider Arm
adjustment
a)
Attach Telescoping Tube to the underside of the
control arm using 4x M8x15mm Bolts[19] and 4x M8
Spring Washers[29].
b) Thread the 3x Foot levelers[12] into underside of base.
Adjust as required.
M8x15mm Bolts
M8 Spring Washers
Adjuster Knob
Handle Lock Knobs
M12 Washer
Plastic Spacer
Slider Arm Assembly Right
9
Foot Leveler
Slider Arm Assembly Left
Advertisement
Table of Contents
