Assembly Instructions - First Degree Fitness WAVE ROWER User Manual

Assembly Instructions

STEP 1 Installing the Seat and Rear Leg to Seat Rail
REQUIRED
Seat Rail [2]
WAVE ROWER Seat [3]
WARNING
Installing the Seat incorrectly
will result in lack of data
pickup during rowing.
STEP 2
REQUIRED
Rubber Bumpstop [8]
2 x M6x10mm Bolts [9]
Install WAVE ROWER Seat[3] onto Seat Rail[2], with
widest part of seat rearward.
Turn Seat Rail over, and install the Rear Rubber
Bumpstop[8] using 2x M6x10mm Bolts[9] with beveled
edge facing forward.
2
Beveled edge facing forward
M6x10mm Bolts
Rubber Bumpstop
9
Underside of
Seat Rail