Table of Contents
Advertisement
NL Set up and connect
Loosen the lock nuts with a SW17
1.
open-end wrench.
To adjust the appliance, turn the
2.
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
All appliance feet must be firmly
planted on the floor.
18
Tighten the lock nuts against the
3.
housing with an open-end
wrench SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.7 Connecting the appliance
electrically
Note: Take the information on the
topic of safety → Page 4
and avoid material damage
→ Page 11 take care of your device
to use safely.
Plug the mains plug of the
1.
appliance's mains cable into a
socket in the vicinity of the
appliance.
The connection data of the device
can be found in the technical data
→ Page 76.
Check the mains plug for tightness.
2.
Advertisement
Table of Contents
