Table of Contents
Advertisement
NL Troubleshooting
Malfunction
Device not working.
Program does not start.
64
Cause and Troubleshooting
Fuse is defective.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or
▶
other devices are functioning.
Start/Refill
Press Start/Refill
▶
Door is not closed.
Close the door.
1.
To start the program, press Start/Additional
2.
.
to fill
Child lock is activated.
→ " Deactivate child lock", page 43
▶
- Ready in + is activated.
Check if - Ready in + is activated.
▶
→ "Keys", Page 24
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press Start/Additional
4.
.
to fill
The detergent drawer is not closed as far as it will go.
Push the detergent drawer into the appliance as far as it will go.
▶
ready.
Pump of the intelligent dosing system is blocked.
Switch off the device.
1.
Clean the pump unit.
2.
→ "Cleaning the detergent drawer",
Page 52
If the indication reappears, enable the service.
3.
→ "Service", Page 74
Note: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→ "Keys", Page 24
was not pressed.
.
Advertisement
Table of Contents
