Table of Contents
Advertisement
Install the pump cover.
4.
Check that the pump cover
-
components are mounted
correctly.
Fit the pump cover and tighten it
5.
as far as it will go.
90°
The pump cover handle must
be vertical.
Place the service cover and click it
6.
into place.
1
Close the service door.
7.
2
Cleaning and maintenance NL
18.6 Cleaning the inlet opening
in the rubber sleeve
Regularly check the inlet opening in
the rubber sleeve for blockages and
clean the inlet opening.
Open door.
1.
Check inlet opening for blockages
2.
and clear blockages.
Note: Do not use pointed or sharp
objects.
18.7 Cleaning the water drain hose
on the siphon
Turn off the device.
1.
Disconnect the plug of the device
2.
from the mains.
57
Advertisement
Table of Contents
