Table of Contents
Advertisement
NL Set up and connect
Tighten the lock nuts against the
3.
housing with an open-end wrench
SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.8 Connecting the appliance
electrically
Insert the mains plug of the
1.
appliance's connecting cable into
a socket in the vicinity of the
appliance.
The connection data of the device
can be found in the technical data
→ Page 58 .
Check the mains plug for tightness.
2.
18
Advertisement
Table of Contents
