Table of Contents
Advertisement
Set program to position 6.
2.
a The display shows UPd.
On Start/Refill
3.
a The software update is installed
learned.
a If the display end shows, is the
software update installed.
Note: The software update may take
several minutes. Do not turn off the
device during software updates.
16.8 Resetting the device's
network settings
On for at least 3 seconds Control
1.
via App press.
Set program to position 5.
2.
a The display shows rES reflected
to give.
On Start/Refill
3.
a The display shows YES reflected
to give.
On Start/Refill
4.
a The network settings are
set back.
a If the display end shows, are the
network settings reset.
Tip: If you want to operate your
appliance again via the Home
Connect app, you must reconnect it
to the home network and the Home
Connect app.
16.9 Remote Diagnosis
Customer service can access your
device via remote diagnosis if you
contact customer service with the
appropriate request, if your device is
connected to the Home Connect
server and
to press.
to press.
to press.
the remote diagnosis is available in
the country where you use the
device.
Tip: More information as well as
hints on the availability of remote
diagnosis in your country can be
found in the service/support section
of the local website: www.home-
connect.com
16.10 Protection per-
personal data
Please observe the instructions
regarding the protection of personal
data.
When your appliance is connected to
a home network connected to the
Internet for the first time, it transmits
the following categories of data to the
Home Connect server (first
registration):
¡ Unambiguous identification of the device
ready (consisting of device keys
and the MAC address of the built-
in
Wi-Fi communication module).
¡ Wi-Fi . Security Certificate
communication module (for
information security of the
connection).
¡ The current software and hardware
version of your home appliance.
¡ Status of any previous
reset to factory settings.
With the first registration, the use of
the Home Connect functions is
prepared. This registration should
only be carried out when you want to
use the Home Connect functionalities
for the first time.
Note: Please note that the Home
Connect functionalities can only be
used in combination with the Home
Connect app. information
Home Connect
49
NL
Advertisement
Table of Contents
