Table of Contents
Advertisement
NL Troubleshooting
Malfunction
High spin speed
rental is not
reached.
Program centrifugal
run does not start.
fizzing, hissing
loud.
long, humming
loudly before the start
of the washing or
softening cycle.
Short buzzing sound
after switching on
of the device.
Loud noise during
spinning.
Clapping, clattering
in the pump.
68
Cause and Troubleshooting
Note: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
Start the program Centrifuge.
▶
Drain pipe or water drain hose is clogged.
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
pinched.
Make sure that the drain pipe and water drain
▶
feed hose is not kinked or pinched.
The unbalance detection system has aborted the spin
due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Note: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
Start the program Centrifuge.
▶
Water is flushed into the detergent drawer under
pressure.
No error - normal operating noise.
▶
Intelligent dosing system doses detergent or care
agent.
No error - normal operating noise.
▶
Intelligent dosing system performs a function test.
No error - normal operating noise.
▶
The appliance is not leveled properly.
Adjusting the device
▶
Device feet are not fixed.
Secure the device feet. Setting the appli-
▶
raat
Transport protections have not been removed.
Remove transport locks
▶
A foreign object has entered the pump.
→ " Cleaning the drain pump", page 54
▶
Advertisement
Table of Contents
