Connecting The Appliance To The Home Connect App; Connecting The Device To The Energy Manager - Bosch WAV28KH0NL User Manual And Installation Instructions

Table of Contents

Advertisement

When on the display err is
8.
displayed, the device is not
connected to the home network.
Check if your device is within
-
range of the home network.
Reconnect the device to WLAN
-
home network (WiFi) with WPS
function.
Connecting the appliance to the
9.
Home Connect app → Page 47.
16.3 Connecting the appliance to
the Home Connect app
Requirements
¡ The device is connected to the
WiFi home network.
¡ The Home Connect app is open
and you have signed up.
Set the program to level 3.
1.
a The display shows APP reflected
to give.
Press Start/Refill
2.
a The device is connecting
with the Home Connect app.
As soon as the appliance is in the Ho-
3.
me Connect app is displayed,
follow the last steps in the Home
Connect app.
aWhen the display shows
the appliance is connected to the
Home Connect app.
16.4 Connecting the device
to the energy manager
When you connect the appliance to
the Smart Energy system (energy
manager), you optimize the energy
consumption. The device starts
only when your own PV system
generates sufficient energy or when
the electricity rate is favorable.
Requirements
¡ The Smart Energy System (Ener-
giemanager) uses the
communication standard of the
EEBus initiative.
¡ You have in the user manual
of the Smart Energy System (Energy
Manager) how the Smart Energy
System (the Energy Manager)
connects to your appliance.
Approx. 3 s onControl via App
1.
to press.
a The display shows auto reflected
to give.
Set program to position 7.
2.
a The display shows Spooky reflected
to give.
On Start/Refill
3.
a The device is connecting
with the Smart Energy system
(energy manager).
.
aWhen on the display and
is displayed, the device has
successfully connected to the
energy manager.
If the device is to be started by the
4.
Smart Energy system (energy
manager), activate Flexstart.
→ "Activating Flexstart", Page 47
Activate Flexstart
Activate Flexstart so that your Smart
Energy system (energy manager) can
start your device when your own PV
system generates sufficient energy or
the electricity tariff is low.
Home Connect
to press.
47
NL

Advertisement

Table of Contents
loading

Table of Contents