I Connection To The Iaqualink™ App - Zodiac iAquaLink Z400iQ Instructions For Installation And Use Manual

Hide thumbs Also See for iAquaLink Z400iQ:

Table of Contents

2.4.4 Activating/deactivating "cold" mode

Activation of «Cold» mode allows the machine's cycle to be automatically reversed to cool the pool water when it

exceeds the setpoint temperature by more than 2°C.

• Press and hold

• Press

to display :

• Press and release

, the symbol

• The home screen automatically reappears after 60 seconds of inactivity on the keypad or by pressing and releasing

To deactivate the "cold/cooling" mode, redo the manipulation, the symbol

«Cold» mode does not allow cooling to be activated manually.

For immediate activation, activate «Cold» mode then return to the main screen and lower the setpoint

temperature to at least 2 degrees below the measured water temperature.

2.5 I Connection to the iAquaLink™ app

The Z400iQ heat pump may be controlled by remote, from a smartphone or tablet, via the iAquaLink™ app available for

iOS and Android systems.

Before you install the app, you must:

• Use a smartphone or tablet connected to Wi-Fi.

• Use a Wi-Fi network with a reasonably powerful signal when connecting to the heat pump.

• Have your home Wi-Fi network password at the ready.

❶

. Download the iAquaLink™ app from the App Store (iOS) or Google Play Store (Android) then create an iAquaLink™

account (if the app is already installed, move onto the next step).

❷. Open the app then add the heat pump to the list of appliances, following the steps described on the smartphone

or tablet.

• For the first step (pairing), stay near the appliance.

will light up.

will go out.

Table of Contents