How To Configure Your Device's Ip Address Manually (No Dhcp) - NetComm NTC-5000 Series User Manual

5.3.1 How to configure static DHCP assignments
This facility is available by clicking on the "Internet Settings" menu followed by "LAN" and then the "DHCP" menu item on the right.
You may assign a particular IP address to a specific device every time that device makes a DHCP request as follows:
Click "Add"
Enter a name for the computer or device
Enter the computer or devices' MAC address
Enter the IP address to assign
Click "Save"

5.4 How to configure your device's IP address manually (no DHCP)

If your device has a static IP address set, you can configure your device to work with the router by manually configuring your device to the
following settings:
Set your device's IP address to any valid IP between 192.168.1.2 and 192.168.1.99 or disable the DHCP server and use any
address. Do not use the IP address assigned to the router's Ethernet interface.
Set your device's subnet to: 255.255.255.0.
Set your Gateway to the IP address of the router's Ethernet interface: 192.168.1.1
DNS (if required) set to 192.168.1.1 or manually set to your carrier's DNS Servers.
YML5000
www.netcomm.com.au
NetComm CallDirect Series - NTC-5000 Series
NTC-5000 User Guide
21