Adding Memory To The Omnibook - HP OmniBook 800 Installation And Setup Manual

C A U T I O N
Expanding the OmniBook
Replacing Internal Hardware
12. Insert the battery. Connect the ac adapter.
13. Press the reset button.
14. Install Windows and the original software on the new drive C using the
Recovery CD-ROM—see "To reinstall Windows and original HP software" under
"Reinstalling Windows" inchapter 2. Also check the README file on the
Recovery CD for instructions.
There are different procedures for Windows 95 and Windows for
Workgroups.
For other operating systems, re-install the operating system from your own
source first, then load the OmniBook-specific software.
15. Restore the files you backed up from the old drive C. In Windows 95, use the
Backup utility (Start, Programs, Accessories, System Tools, Backup, Restore
tab).

Adding Memory to the OmniBook

The OmniBook memory-expansion slot accommodates one memory-expansion
board. You can install a memory-expansion board to increase the total amount of
memory. (To find out your OmniBook memory size, see HP User Tools in
Windows 95 or OmniBook Tools in Windows for Workgroups.)
Take precautions against damage from static electricity:
Gather all the parts you need so you can complete the installation in one
sitting.
Don't remove the memory-expansion board from its packaging until you've
removed the slot cover from the OmniBook.
When you remove the board from its packaging, hold it only by its edges. Don't
touch the electronic components or gold traces.
Also, close all applications, exit Windows, shut down the computer, unplug the
ac adapter, and remove the battery. Otherwise, the OmniBook or memory-
expansion board may be damaged.
3-8