Using Omnibook Tools; To Run Omnibook Tools - HP OmniBook 800 Installation And Setup Manual

System Information
Personalize
Desktop, Color, Date/Time, International
Status Panel Settings
Display Options
Changing the Configuration

Using OmniBook Tools

Using OmniBook Tools
OmniBook Tools give you a convenient way in Windows for Workgroups to change
the way your OmniBook looks and operates. For many settings, it's an alternative to
using the System Configuration Utility.

To run OmniBook Tools

1. In Program Manager, double-click the OmniBook Tools icon (in the Main
group).
2. Click the buttons for the changes you want to make. You're prompted if you
need to reboot the computer. Click Help or see the table below for more
information.
3. After you make the changes, exit OmniBook Tools.
Shows current port settings and system memory.
Sets Windows desktop, color, date and time, and international settings.
"Enable Status Panel" sets whether the Status Panel can be displayed.
"Location in Display" sets the corner of the display where the Status Panel
appears.
"Configuration" sets when each indicator appears in the Status Panel.
"OmniBook Display" sets whether the built-in display is on or off when an
external display is present. (You can press FN+PrtSc at any time to cycle among
the different display combinations.)
"Video Configuration" sets the number of dots used to display the entire screen
image, the number of colors available, and other display options.
"Display Messages" sets whether reminder messages appear when you dock or
undock.
4-6