Adding Or Replacing A Memory Module In The Expansion Memory Module Slot - HP 625 WS775EA User Manual

Adding or replacing a memory module in the expansion
memory module slot
The expansion memory module slot is stacked above the primary memory module slot. To add or
replace a memory module in the expansion memory module slot, follow these steps:
1. Save your work.
2. Shut down the computer and close the display.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by
pressing the power button. Then shut down the computer through the operating system.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove the battery from the computer.
7. Loosen the bottom door screws (1).
8. Slide the bottom door forward (2), and then lift it (3) away from the computer.
NOTE:
92 Chapter 9 Memory modules
Downloaded from LpManual.com Manuals
Refer to the illustration that most closely matches your computer.