Hardware Specifications - HP OmniBook 800 Installation And Setup Manual

Hardware Specifications

Display Backlit liquid-crystal display (LCD).
Color SVGA (800 × 600).
Accelerated PCI-bus video controller.
Zoomed video enabled.
Keyboard Enhanced PC functionality with compact layout.
Full-sized keyboard with embedded numeric keypad.
FN key.
Mouse PS/2-compatible mouse.
Memory RAM: 16 MB built in, expandable to 80 MB maximum.
Mass Storage IDE hard disk drive: Two card slots.
Sound System SoundBlaster PRO-compatible stereo sound, microphone, speakers.
Input jacks: microphone (monaural), line (stereo).
Output jack: headphone or speakers (stereo).
Interfaces Serial: one 9-pin 115,200-baud RS-232 port (with hardware handshaking).
Parallel: one 25-pin bi-directional port.
Infrared: one 4 Mbps IrDA II bi-directional port (fast IR). IrDA-compatible.
VGA output: one 15-pin color-VGA port (up to 1024×768 ×256 pixels).
Floppy drive: one custom floppy-drive port.
Docking/SCSI-II port: one custom port for a docking system or an OmniBook-to-SCSI
adapter cable.
Card Slots Electrical: 16/32 bit PC Card Standard with CardBus.
Mechanical: Two type-II or one type-III PC-Card 2.1 slots.
AC Adapter Input: 100 to 240 Vac (50 to 60 Hz).
Output: 12 Vdc, 3.3 A.
Operating temperature: 0 to 40°C (32 to 104°F).
Battery Pack Voltage: 7.2 Vdc (Lithium-ion battery).
Recharge time: up to 2.5 hours.
Operating time from 100% charge: up to 3 hours.
Temperature Operating: 0 to 35 C (34 to 95 F).
Storage with data retention: 0 to 55 C (32 to 131 F).
Humidity Operating and storage: 90% relative humidity at 40 °C (104 °F) maximum.
Specifications, Regulatory, and Safety Information
Hardware Specifications
6-3