Table of Contents
Advertisement
1. Put a super capacitor module into the holder, and press it down to secure it into the holder.
2. Align the pins on the metal cover with the holes in the super capacitor holder, pull out the blue
latch on the cover, and slide the cover into the holder until the pins pass through the holes.
Then, release the blue latch to lock the cover into place.
Step 5.
Connect the super capacitor module to an adapter with the extension cable that comes with the
super capacitor module. See "RAID super capacitor modules" on page 66.
Install the system fan cage
Use this information to install the system fan cage.
About this task
Attention:
• Read "Installation Guidelines" on page 134 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Bz2XIeLEfGcrLGm9TSY_yt
• Youku:
http://list.youku.com/albumlist/show/id_52339612.html
Procedure
Figure 107. System fan cage installation
Step 1.
Align both sides of the system fan cage with the corresponding mounting posts in the chassis.
Then, press the system fan cage straight down into the chassis.
ThinkSystem SR665 Setup Guide
222
Advertisement
Table of Contents
