Download Print this page

Hardware Installation - SIIG JJ-E01111-S1 Quick Installation Manual

Dp 1-port rs232 serial pcie with 16950 uart

Advertisement

Hardware Installation

General instructions for installing the card are
provided below. Since the design of computer
cases and motherboards vary, refer to your
computer' s reference manual for further
information, if needed.
Static Electricity Discharge may permanently
damage your system.
electricity build up in your body by touching your
computer' s case for a few seconds. Avoid any
contact with internal parts and handle cards
only by their external edges. Note: For low profile
chassis, remove the standard height bracket and
install the enhanced low-profile bracket now.
1.
Turn OFF the power to your computer and
any other connected peripheral devices.
2.
Unplug the power cord and remove the
cover from the computer.
3.
Remove the slot bracket from an available
PCIe slot.
Discharge any static
3

Advertisement

loading