Table of Contents
Advertisement
USB Pin-out Header
The USB pin-out header consists of 4 pins and allows for
1 USB connection.
Important: The internal USB port and the USB Pin-out
Header can not be used at the same time. Do not connect
devices to both ports at the same time.
GND
DATA +
DATA -
VCC/+ 5VDC
Hardware Installation
General instructions for installing the card are provided
below. Refer to your computer's reference manual for
further information, if needed.
1.
Turn OFF the power to your computer.
2.
Unplug the power cord and remove your computer's
cover.
3.
Remove the slot bracket from an available PCI slot.
4.
Carefully align the card to the selected PCI slot and
push the board down firmly, but gently, until it is
well seated.
5.
Replace the slot bracket's holding screw to secure
the card.
Figure 2. USB Pin-out Header
Black
Green
White
Red
3
Advertisement
Table of Contents
