Hardware Installation - SIIG FireWire 800 Quick Installation Manual

Layout
FireWire 800 port
(9-pin)
FireWire 400 port
(6-pin)
*Note: FireWire devices that have their own power
supply do not require the optional power adapter
to be connected in order to work. However,
non-powered FireWire devices require this optional
power adapter to work. The power adapter can be
purchased at SIIG's Online Store, part # NN-ADA011.

Hardware Installation

General instructions for installing the card are provided
below. Since the design of notebook computers may
vary, refer to your system
information, if needed.
Insert the ExpressCard into the ExpressCard/54 slot of
your notebook computer. Make sure it is inserted all the
way in for a solid connection.
2
Power LED
Figure 1. Layout
s reference manual for further
'
Power Adapter Jack*