Download
Share
Print this page
  1. Manuals
  2. Brands
  3. SIIG Manuals
  4. Computer Hardware
  5. JU-PCM422-S2
  6. Quick installation manual

SIIG JU-PCM422-S2 Quick Installation Manual

Hi-speed usb 4-port cardbus
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Hi-Speed USB 4-Port CardBus
Quick Installation Guide
Introducing the Hi-Speed USB 4-Port
CardBus
The Hi-Speed USB 4-Port CardBus adds high-speed USB
2.0 interface to your notebook computer. A switching
power adapter is not required to provide standard power
output for each port. It supports high-speed (480 Mbps),
full-speed (12 Mbps), and low-speed (1.5 Mbps) data
transfer modes.
Key Features and Benefits
•
Compliant with USB specifications revision 2.0
•
PCMCIA Cardbus Interface with Power
Management
•
Supports simultaneous operation of multiple high-
speed USB 2.0 and USB 1.1 devices
•
Hot-swapping feature allows you to connect/
disconnect USB devices without first turning your
notebook computer off
•
Works with a various type of USB 2.0 and USB 1.1
devices simultaneously including hubs, removable
drives, digital cameras, scanners, CD-RWs,
DVD-RAMs, PC video cameras, printers, CF/SM/
MMC/SD/Memory Stick memory card readers, and
more
Note: USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host adapter
or USB 2.0 hubs.
04-0255E
1

Advertisement

loading

Related Manuals for SIIG JU-PCM422-S2

Summary of Contents for SIIG JU-PCM422-S2

  • Page 1 Hi-Speed USB 4-Port CardBus Quick Installation Guide Introducing the Hi-Speed USB 4-Port CardBus The Hi-Speed USB 4-Port CardBus adds high-speed USB 2.0 interface to your notebook computer. A switching power adapter is not required to provide standard power output for each port. It supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data transfer modes.

  • Page 2: Hardware Installation

    System Requirements • Pentium or equivalent notebook computer with an available CardBus Type II slot • Windows 2000 SP4/XP (32-/64-bit)/Server 2003 ® (32-/64-bit)/Vista (32-/64-bit) • Power Book G3 or later with an available CardBus Type II slot • Mac OS X v10.2.8 or later Package Contents •...

  • Page 3: Driver Installation Windows

    Connect the optional switching power adapter to the Hi-Speed USB 4-Port CardBus, then plug the switching power adapter into an appropriate power source. Insert the PC Card into the Type II PC Card slot of your notebook computer with its 68-pin connector facing the slot.
  • Page 4 To Verify Windows Driver Installation Check Device Manager to verify successful driver installation. Windows 2000/XP/Server 2003: Right click My Computer, click Manage, then click Device Manager. Windows Vista Manage, click Continue, then click Device Manager. The drivers for this controller show up differently under different versions of Windows.
  • Page 5 Mac OS (v10.2.8) or later Mac OS X have built-in driver support for this controller. Just install the board and Mac OS will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Mac OS Driver Installation Mac OS X (v10.2.8) or later: Since we didn't load any additional driver under these Mac OSs, the only way to verify the board...
  • Page 6 Blank Page...

  • Page 7: Technical Support And Warranty

    Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510) 413-5333.

  • Page 8: Fcc Compliance Statement

    6078 Stewart Avenue Fremont, CA 94538-3152, USA Hi-Speed USB 4-Port CardBus is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation. Mac and Mac OS are trademarks of Apple Computer. Pentium is a registered trademark of Intel Corporation.