Table of Contents
Advertisement
Layout
PC Card
Connector
Figure 1: Single-Serial PC Card Layout
Hardware Installation
General instructions for installing the card are provided
below. Since the design of notebook computers may
vary, refer to your system's reference manual for further
information, if needed.
1.
Power off your notebook computer and any other
connected peripheral devices.
2.
Insert the PC Card into the PC Card slot of your
notebook computer with its PC Card Connector
facing the slot. Make sure it is inserted all the way
in for a solid connection.
3.
Power on your notebook computer.
2
Serial Port
(9-pin)
Advertisement
Table of Contents
