Table of Contents
Advertisement
Quick Links
Introducing the CyberSerial ExpressCard
The CyberSerial ExpressCard adds one high-speed serial
port to an ExpressCard equipped computer.
Features and Benefits
•
Compatible with hi-speed modems, monitoring
equipment, serial networking and other serial
devices
•
One DB9 RS232 port with 16550 UART
•
Supports data rate of up to 115 Kbps
•
Built-in 16-byte FIFO buffers dramatically increase
data transmit/receive speed, especially under
Windows multitasking environment
System Requirements
•
Notebook or desktop computer with an available
ExpressCard slot
•
Windows 2000/XP/Server 2003
Package Contents
•
CyberSerial ExpressCard
•
Driver CD
•
Quick Installation Guide
04-0415A
CyberSerial ExpressCard
Quick Installation Guide
1
Advertisement
Table of Contents
Related Manuals for SIIG JJ-EC1012-S1
Summary of Contents for SIIG JJ-EC1012-S1
- Page 1 CyberSerial ExpressCard Quick Installation Guide Introducing the CyberSerial ExpressCard The CyberSerial ExpressCard adds one high-speed serial port to an ExpressCard equipped computer. Features and Benefits • Compatible with hi-speed modems, monitoring equipment, serial networking and other serial devices • One DB9 RS232 port with 16550 UART •...
-
Page 2: Hardware Installation
Layout DB9 port Figure 1: CyberSerial ExpressCard Hardware Installation General instructions for installing the CyberSerial ExpressCard are provided below. Since the design of notebook computers vary, refer to your system’s reference manual for further information, if needed. Insert the CyberSerial ExpressCard into the ExpressCard slot of the computer with it's Express Card Connector facing the slot. -
Page 3: Driver Installation
Driver Installation This section provides information on how to install the CyberSerial ExpressCard drivers. Windows 2000 At the Found New Hardware Wizard, click Next. Select Search for a suitable driver for my device (recommended), and click Next. Check Specify a location, uncheck the other boxes, then click Next. -
Page 4: Connecting Serial Devices
Windows Server 2003 At the Found New Hardware Wizard, select No, not this time, then click Next. Select Install from a list or specific location (Advanced), then click Next. Insert the driver CD, check Include this location in the search, uncheck the other box, type in D:\2003, and click Next. -
Page 5: Changing Com Port Number
Changing COM Port Number Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. From the Device Manager window double click Ports (COM & LPT), then double click the serial port you want to change. - Page 6 For Windows XP/Server 2003 Click the Safely Remove Hardware icon located in the taskbar by the system clock. Click Safely remove USB Compound Device. When the Safe to Remove Hardware box pops up, the CyberSerial ExpressCard can be ejected.
-
Page 7: Technical Support And Warranty
RMA number posted on the outside of the shipping carton. • You are responsible for the cost of shipping the product to SIIG at the following address: SIIG, Inc. 6078 Stewart Avenue... - Page 8 Fremont, CA 94538-3152 CyberSerial ExpressCard is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.