1. Shared Pins
Some Vref pins listed below are connected mutually on this board.
To prevent these pins from being shorted out, it is recommended to set them as
"Float" in advance.
Please refer to the following steps and check the "Unused IOB Pins" setting.
1. Right click [Generate Programming File] and open [Process Properties]
window.
2. Confirm [Unused IOB Pins] in [Configuration Options].
XCM-020 Series v1.0
[IMPORTANT]
VRFB
V09_REF
D3
A5
G13
D19
F19
D22
R19
-
2