Share Pins [Important] - Humandata XCM-018Z User Manual

1. Share Pins
Some Vref pins listed below are connected mutually on this board.
To prevent these pins from being shorted out, it is recommended to set them as
"Float" in advance.
Please refer to the following steps and check the "Unused IOB Pins" setting.
1. Right click [Generate Programming File] and open [Process Properties]
window.
2. Confirm [Unused IOB Pins] in [Configuration Options].
XCM-018Z Series v1.0
[IMPORTANT]
VRFB
A4
A9
A13
C16
V09_REF
K8
Y1
M4
B3
2