Fujitsu SP-1130Ne Operator's Manual page 25

10
Connect the scanner to the computer by using the USB cable that is supplied, and click the [OK] button
in the message window.
The [IP Address Setting Tool] window appears.
HINT
You do not need to disconnect the LAN cable from the scanner when connecting the USB cable.
11
Set the IP address and the scanner name, and then click the [OK] button.
For details about the IP Address Setting Tool, refer to the Network Setup Tool for SP Series Help.
HINT
The scanner name and the IP address that you set are displayed in the scanner list in Scanner Selection
Tool.
12
Disconnect the USB cable from the scanner.
13
Click the [Search] button in the [Scanner Selection Tool] window to search for the scanner that you
want to use.
The scanner is not displayed in the scanner list right after setting the IP address. Search for the scanner by
clicking the [Search] button.
For details about Scanner Selection Tool, refer to the Network Setup Tool for SP Series Help.
14
In the scanner list, select the scanner that you want to use, and then click the [OK] button.
15
Click the [Exit] button in the [SP Series Setup] window.
16
Start an image scanning application, and select the scanner to be used for scanning.
The scanner name depends on the scanner driver type and the scanner connection method.
Select the scanner name that is used for a wired LAN connection. For details, refer to the help for the scanner
driver.
17
Check whether the scanner is ready to start scanning.
For details, refer to How to Perform a Basic Scan (page
HINT
● If Scanner Selection Tool does not start up, follow the procedure below to start it up.
- Windows Server 2008 R2/Windows 7
Click [Start] menu → [All Programs] → [SP Series] → [Scanner Selection Tool for SP Series].
- Windows Server 2012
Right-click the Start screen, and select [All apps] on the app bar → [Scanner Selection Tool for SP Series]
under [SP Series].
- Windows Server 2012 R2/Windows 8.1
Click [↓] on the lower left side of the Start screen and select [Scanner Selection Tool for SP Series] under [SP
Series].
To display [↓], move the mouse cursor.
37).
25
Scanner Setup