Entering And Resuming From Power Saving Mode - Fujitsu SP-1130Ne Operator's Manual

Image scanner
Hide thumbs Also See for SP-1130Ne:
Table of Contents

Advertisement

Entering and Resuming from Power Saving Mode

The scanner enters power saving mode when it is left on without being used for a certain period of time.
Power saving mode keeps the power consumption low when the scanner has not been used for a certain period
of time.
If the scanner is left powered on for 10 minutes (factory default setting) or longer without being used, it
automatically enters power saving mode.
Even after the scanner enters power saving mode, the power indicator remains on.
To resume from power saving mode, perform one of the following:
● Load a document in the ADF paper chute (feeder).
● Press the scan/stop button on the operator panel.
● Scan a document with the image scanning application.
If the scanner is not operated for a certain period of time, it turns off automatically to reduce power
consumption while the scanner is in standby.
To disable this function, clear the [Power off after a certain period of time] check box in [Device Setting] of the
Software Operation Panel. For details, refer to
saving] (page
136).
To turn the scanner back on after it has turned off automatically, press the power button on the operator panel.
For details, refer to
How to Turn the Power ON (page
ATTENTION
● The scanner may not enter power saving mode if there was a document remaining on the paper path. For
details about how to remove a document, refer to
● Depending on the image scanning application being used, the scanner might not turn off even if the
[Power off after a certain period of time] check box is selected.
● If the scanner is automatically turned off while you are using the image scanning application, exit the
application, and then turn the scanner back on.
HINT
The waiting time for entering power saving mode can be changed in the Software Operation Panel.
For details, refer to
Waiting Time for the Scanner to Enter Power Saving Mode [Power
Waiting Time for the Scanner to Enter Power Saving Mode [Power saving] (page
29).
When a Paper Jam Occurs (page
30
Basic Operations
85).
136).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents