Fujitsu SP-1130Ne Operator's Manual page 73

ATTENTION
Vertical streaks may appear on images if the glass section is dirty.
Ultrasonic sensor (× 2)
Gently wipe dirt and dust off the surface of the ultrasonic sensors.
HINT
If it is difficult to clean, use a cotton swab.
Feed roller (× 2)/Eject roller (× 2)
The power must be turned on to rotate the feed/eject rollers for cleaning.
a
Turn on the scanner.
For details, refer to
b
When the operator panel is in ready status, open the ADF.
For details, refer to
How to Turn the Power ON (page
How to Open the ADF (page
73
29).
32).
Daily Care