Fujitsu SP-1130Ne Operator's Manual page 53

● Load plastic cards one at a time in the ADF paper chute (feeder).
● It is recommended to place the card face-down in the ADF paper chute (feeder).
● Rigid cards may not be fed properly.
● If there is dirt on the surface of the card, such as grease marks (fingerprints), perform scanning after wiping
the dirt off.
● Scanning a thick document such as a plastic card will always be falsely detected as overlapped documents.
In such a case, disable the setting in the image scanning application or scanner driver so that overlapped
documents (multifeeds) are not detected, and then try scanning again.
53
How to Load Documents