Sanwa MT-R RX-493i User Manual page 7

How to Use Each Feature
ABOUT KEY OPERATION
● The user can set up and make a calling easily with each key.
Key Operation
Push
▲
▼
▲
▼
▲
▼
▲
▼
11
Display Panel
Up Key
Enter Key
▲
▼
Down Key
Back and Cancel Key
Names Performance
●Moves to the setup screen from the top
Enter
screen.
●Selects a feature and item to set.
*By long pressing the Enter, the setting
goes back to default.
●The cursor moves upward.
Up
●The set value increases.
●Moves the cursor downward.
Down
●The set value decreases.
●Goes back to one step before.
Back / Cancel
●Cancels the setting.
ABOUT DISPLAY PANEL
● Each feature of MT-R can be selected directly by each key.
● You can set up each channel feature separately.
● As you turn the power switch on, the top screen launches after the boost screen is displayed(when the
boot setting is on). When changing each setting, select the menu by enter operation.
Top Menu
▲
Push up and down key, display
switches top display to telemetry display
▼
Push
Telemetry Menu
*Push down key on the
telemetry display.
Telemetry data will be
shown max values.
When holding down key,
max values will be reset.
When using RX-491/492/493/493i and
SUPER VORTEX Series/PGS Servo Series/SGS-02,
Turn telemetry function on, then display telemetry
data from receiver.
Menu Window
*Push enter operation
to switch from Top menu
Antenna mark will be shown
while using telemetry
↑
BACK
↓
ENTER
↑
BACK
↓
ENTER
12