Sanwa MT-R RX-493i User Manual
  1. Manuals
  2. Brands
  3. Sanwa Manuals
  4. Control Systems
  5. MT-R RX-493i
  6. User manual

Sanwa MT-R RX-493i User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Sw3
Sw1

Advertisement

Table of Contents
loading

Related Manuals for Sanwa MT-R RX-493i

Summary of Contents for Sanwa MT-R RX-493i

  • Page 2 Warning Things that you should follow in and dry the interior. order to prevent break down. When the interior is dry, please submit it to the Sanwa Service for inspection even if it performs normally.
  • Page 3 Safe Handling and Precautions INDEX ■Structure and the Standard of the Set・・・・・・・・・・・・・・・・・・・・・・・5 Note Precautions for Safe Use Warning 　●Structure of The Set (5) 　●Set Specification (5) ■Before Using・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・6-7 ● 2.4 GHz frequency band is not only used for radio control. This frequency band 　●Adjusting Tension of The Steering and Throttle (6) is shared with ISM (Industry, Science and Medical) band.
  • Page 4 Before Using STRUCTURE OF THE SET ADJUSTING THE STEERING AND THROTTLE TENSION MT-R can adjust the tension of the steering/throttle trigger to match operation of the steering/throttle to the user’s preference. MT-R RX-493i PC (Primary Component) <Ａ> Transmitter MT-R (TX-4101) Adujsting the Steering Tension <Ｂ>...

  • Page 5: About The Power Source

    Before Using Name of Each Part of Transmitter ADJUSTING THE ADJUSTABLE TRIGGER Display Panel Adjusting the brake trigger Brake trigger You can adjust brake trigger position accroding to your fingers by replaceing the included brake Internal Antenna trigger. Standard Size, +1 Size, +2 Size is included. ( +1 ) ▲...

  • Page 6: About The Receiver

    • For R/C System parts such as the transmitter, receiver, servos, ESC (FET Speed Controller) and transmitter battery, use genuine SANWA products. straight. *When combining products other than genuine SANWA products, modifying, adjusting or exchanging parts is done at a place other than SANWA, we do not take any responsibility.
  • Page 7 How to Use Each Feature ABOUT KEY OPERATION ABOUT DISPLAY PANEL ● The user can set up and make a calling easily with each key. ● Each feature of MT-R can be selected directly by each key. ● You can set up each channel feature separately. Display Panel ●...
  • Page 8 Before Driving A Car HOW TO PLACE SERVO ARM HOW TO SET SUB TRIM [SUB-T] Power the servo will be returned neutral position. ● ● In case servo cannot place correctly as 90 degree or RC Car manual instruction, please arrange neutral Example of SUB TRIM Arrangement position by SUB TRIM setting.
  • Page 9 Before Driving A Car HOW TO SET END POINT ADJUSTMENT [EPA] HOW TO SET DUAL RATE [D/R] ● Adjust right and left maximum steering angle are same after setting SUB TRIM ● About Steering Operation In case RC car is too much cornering and difficult to drive, DUAL RATE(D/R) adjust maximum steering angle. *In case of not setting EPA, right and left cornering are different as the below picture.

  • Page 10: About The Menu Structure

    How to Use Each Feature DUAL RATE [ D/R ] ABOUT THE MENU STRUCTURE SETTING ● The user can set up features and do model memory call easily by using each key. ● You can adjust steering angle when operating the steering wheel and throttle trigger to their peak. ●...
  • Page 11 How to Use Each Feature SPEED CURVE SETTING SETTING ● Features to control the speed of the servos used for steering and throttle. By setting, the RC car is not ● Curve changes servo work rate by steering and throttle position. It responds quickly when the set value is affected even when doing a sudden operation.
  • Page 12 How to Use Each Feature FAIL SAFE [ F/S ] BASE SETTING SETTING ● Fail Safe Operation is a feature to keep the servos in a predetermined position for each channel in the ● Base sets multiple functions all at once such as the Reverse that determines the direction of the servo of event that the receiver cannot receive a signal from the transmitter.
  • Page 13 How to Use Each Feature AUX1・END POINT ADJUSTMENT BASE AUX1-EPA SETTING ● Base sets multiple functions all at once such as the Reverse that determines the direction of the servo of ● You can use AUX1 for functions of accessories and adjust the maximum steering angle with EPA. Since each channel, the speed controller according to a specific RC car, the Sub Trim that adjusts the neutral you can set H/L separately, precise adjustment is possible.

  • Page 14: Function [Func]

    How to Use Each Feature ANTI-LOCK BRAKE [ALB] FUNCTION [FUNC] SETTING ● Anti-Lock Brake enables stable braking on a low grip road. ● Function can set trim, ALB (Anti-Lock Brake), OFFSET, and TH TYPE (Throttle Type) on each channel. ● Because of the stable braking, you can drive ideal cornering lines as intended. TRIM 1) Select [ALB] with up and down key.
  • Page 15 How to Use Each Feature THROTTLE TYPE [TH TYPE] FUNCTION [FUNC] SETTING ● You can move the neutrals position of the throttle and set the operating ratio of the forward side and the ● Function can set trim, ALB (Anti-Lock Brake), OFFSET, and TH TYPE (Throttle Type) on each channel. brake (backward) side to either 7:3 or 5:5.
  • Page 16 How to Use Each Feature POINT AUX ● AUX menu sets the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX (STEP), ● By setting Point AUX and assigning the movement of AUX1/AUX2 (3ch, 4ch) to the POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase).
  • Page 17 How to Use Each Feature FRONT-REAR WHEEL SEPARATE DRIVE [MOA] ● AUX menu sets the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX (STEP), ● By setting Motor On Axle (MOA), you can adjust the drive ratio of front and rear wheels of a front-rear dual POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase).
  • Page 18 How to Use Each Feature CODE AUX ● AUX menu sets the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX (STEP), ● Code AUX (CODE AUX) is a feature to perform code communication POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase). MOA (Motor On by assigning a setting value to each code of CODE1-CODE10.

  • Page 19: Model Menu

    How to Use Each Feature MODEL MENU MODEL NAME MODEL ● You can set the features about Model Select, Model Name, Model Copy and Model Clear. ● You can register a model name with up to 10 characters of alphabets, numbers, symbols, and Japanese ●...

  • Page 20: Model Copy

    How to Use Each Feature MODEL MENU MODEL CLEAR MODEL ● You can set the features about Model Select, Model Name, Model Copy and Model Clear. ● A feature to clear (initialize) the setting data of Models. ● Installed with high capacity EEPROM and it can memorize data for 20 models of M01 ~ M20. 1) Select [MODEL] with up and down key.

  • Page 21: Timer Menu

    How to Use Each Feature INTERVAL TIME [INT TIMER] TIMER MENU TIMER ● It activates the alarm at the time set at the beginning of running and uses it as the guideline for the lap ● It has three timer features including Lap Timer, Interval Timer and Down Timer. time.

  • Page 22: Telemetry Menu

    How to Use Each Feature ALERT SETTING TELEMETRY MENU TELEMETRY ● A menu for setting Telemetry-related LOGGER, ALERT SETTING, TELEMETRY SETTING. ● Alert setting is alerting by setting temperature and voltage. Also, transmitter blue LED will flash by setting telemetry data. ●...

  • Page 23: System Menu

    How to Use Each Feature SYSTEM MENU SYSTEM ● A feature for setting system of the transmitter, such as Bind, Key Assignments (KEY ASSIGN),Buzzer, 7) Setting BIND Battery, LCD and CALIBRATION. ● What is BIND: Each of MT-R transmitters has its own unique ID (solid identification) number. BIND is to let the receiver memorize the ID number.
  • Page 24 How to Use Each Feature SYSTEM MENU KEY ASSIGN TRIM SYSTEM ● A feature for setting system of the transmitter, such as Bind, Key Assignments (KEY ASSIGN),Buzzer, ● You can change the setting value of each feature with Trim1 - Trim3. Battery, LCD and CALIBRATION.
  • Page 25 How to Use Each Feature SYSTEM MENU SYSTEM ● You can set LCD contrast (intensity) and lighting mode of Back Light. BUZZER 1) Select [SYSTEM] with up and down key. Determine with the Enter operation. ● You can set operating sounds of key operation, Trim and Switch and the buzzer tones. 2) Select [LCD] with up and down key.

  • Page 26: Quick Setup Wizard

    How to Use Each Feature 5 ) When deciding the car type using Enter, the screen changes QUICK SETUP WIZARD ENTER BACK to Initialization (Model Initialization) screen. ●Quick Setup Wizard function is easily to set up when you set up new RC car. Do initialization following the message.
  • Page 27 How to Use Each Feature ABOUT QUICK SETUP WIZARD ●Quick Setup Wizard function is easily to set up when you set up new RC car. ●Setup Wizard is fllowing start menu→model select→type select→model initialize→RF mode ⑥ GP CAR STANDARD select→response mode select→bind→base setting. For Standard Nitro Car setting Assigned to turn on and off OFFSET function to SW2.
  • Page 28 Assign Function List Transmitter LED Indication List Display Name Function Name TRIM LED Condition Working Condition ーーー(NO FUNCTION) ○ ○ ○ ○ Light on Normal Operation (While Transmitter Output) TRIM-ST Steering Trim ○ ー ー ー High-speed Flashing ALB Working TRIM-TH Throttle Trim ○...
  • Page 29 Bad connection of connectors. Bring to Sanwa Service BUZZER ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・...

  • Page 30: Fcc Compliance Statement

    This transmitter has been tested and meets the FCC RF exposure guidelines when used with the SANWA accessories supplied or designated for this product, and provided at least 20cm Please note that products purchased outside of North America cannot be serviced under warranty by separation between the antenna the user's body is maintained.
  • Page 31 1 6.30.2022 670A14984A...

Table of Contents