Quick Setup Wizard - Sanwa MT-R RX-493i User Manual

How to Use Each Feature

QUICK SETUP WIZARD

●Quick Setup Wizard function is easily to set up when you set up new RC car.
●Setup Wizard is fllowing start menu→model select→type select→model initialize→RF mode
select→response mode select→bind→base setting.
1)Turn the power switch on with holding enter key.
▲
⇒
HOLDING HOLDING
▼
2) Quick Setup screen is displayed.
Setup Wizard will be started with Enter.
3) Switch model select, and select model with
up and down key.
Determined car type with enter.
4 ) When the screen is changed to Car Type selection screen, select a Car Type using Multi-Selector. When a
Car Type is selected, set with Enter.
Setting up Type
○Setting Range:
EP CAR STANDARD
EP CAR DRIFT
EP CAR (PGS)
EP CAR (SV-G2P)
EP CAR (SV-D2)
GP CAR STANDARD
1/5 GP CAR DUAL BR1
1/5 GP CAR DUAL BR2
CRAWLER 4WS/MOA
○Default:
EP CAR STANDARD
*Channel operation of each type will be as follows.
TYPE Lists
TYPE EP CAR EP CAR EP CAR EP CAR
CH STANDARD (DRIFT) (PGS) (SV-G2P)
CH1 STEERING STEERING STEERING STEERING
CH2 ESC ESC ESC ESC
AUX1 AUX1 CODE1 CODE1
CH3
CH4 AUX2 AUX2 CODE2 CODE2
*Select a type to be used according to an R/C.
49
Power On
ENTER
ENTER
ENTER
ENTER
EP CAR GP CAR 1/5 GP 1/5 GP CRAWLER
(SV-D2) STANDARD DUAL-BR1 DUAL-BR2 4WS/MOA
STEERING STEERING
STEERING STEERING STEERING
F
1
THROTTLE THROTTLE
ESC
ESC THROTTLE
/BRAKE /BRAKE R F
STEERING BRAKE STEERING
AUX1
CODE1
R
2 R
BRAKE ESC
CODE2 CODE2 BRAKE F
F
R
5 ) When deciding the car type using Enter, the screen changes
to Initialization (Model Initialization) screen.
Do initialization following the message.
6 ) When initializing (Initializing Model) is completed,
the screen changes to RF Mode Selection Screen.
MT-R is only compatible FH5 RF mode.
○Default: FH5
・ Compatible Receivers: FH5
7 ) Once RF Mode for the receiver is determined,
the screen changes to the Response Mode screen.
Set Response Mode according to the servos and
the equipment to be used.
Set with up and down key and finalize with the Enter key.
BACK
○ Setting Range: NOR(Normal / Analog Servo)
SHR(High Response / Digital Servo)
SSR(Super Response / SRG Servo)
SUR (Ultra Response / PGS Servo)
○ Default:
NOR(Normal / Analog Servo)
8 ) When Response Mode setting is completed,
the screen changes to BIND Set up Screen.
BACK
Follow the screen message and start Binding.
9 ) When Binding (BIND) is done,
the screen changes to the Base Set Up screen.
Complete setting for each channel (refer to p.43).
10 ) When Base setting is done, Set Up Wizard will end.
If you press the Enter button,
the screen changes to the Top screen.
BACK
BACK
IMPORTANT
• Please note that the analog servos do not work in SHR/SSR/SUR modes. If you mistakenly use the analog servos in
SHR/SSR/SUR mdoes, it does not work normally and the servos will be broken. Never use analog servos in SHR/SSR/
SUR modes. For digital servos (SRG, ERB, ERS Series and Digital ERG Series), either NOR or SHR mode works.
• SSR mode works only for PGS, SRG Servos, SUPER VORTEX/SV-PLUS series, HV-12, STOCK SPECIAL and HV-01.
• SUR mode works only for PGS servo, SUPER VORTEX Gen2 / PRO / SV-D2.
• With SHR/SSR/SUR mode, BL-RACER, BL-FORCE, F2000, F2200. F3000 F3300, SBL-01 02 and 03CL do not work.
Make sure to use them in NOR mode.
• BL-SIGMA, SV-08, HV-10, HV-12 and F2500 work in NOR/SHR modes.
• Please read user manual of using speed controller.
RX-491,RX-492,RX-492i RX-493,RX-493i
ENTER BACK
ENTER BACK
ENTER BACK
ENTER BACK
50