Model Copy - Sanwa MT-R RX-493i User Manual

How to Use Each Feature
MODEL MENU
● You can set the features about Model Select, Model Name, Model Copy and Model Clear.
● Installed with high capacity EEPROM and it can memorize data for 20 models of M01 ~ M20.
● You can copy a selected model data to another model.
1) Select [MODEL] with up and down key
Determine with the Enter operation.
2) Setting Model Copy [MODEL COPY]
Select [MODEL COPY] with up and down key.
Determine with the Enter operation.
3) Selection of a Copy Destination Model
Select a Copy Destination Model with up and down key.
*Model for copy is model date is current using model.
4) When Enter is being operated a message is displayed
on the screen. Follow the display to operate
and complete Model Copy.
37
MODEL

MODEL COPY

ENTER
ENTER
Copy from this model
1. Select Copy Model
Model for copy
2. Confirm to Copy
3. Executed
Back to 1. after completed
● A feature to clear (initialize) the setting data of Models.
1) Select [MODEL] with up and down key.
Determine with the Enter operation.
2) Setting Model Clear [MODEL CLEAR]
Select [MODEL CLEAR] with up and down key.
Determine with the Enter operation.
3) When Enter is being operated, a message is displayed
on the screen. Follow the display to operate
and complete Model Clear.
BACK
BACK
NO: Back to 1.
YES: Move to 3.
MODEL CLEAR
ENTER
ENTER
1. Confirmation
NO: Back to Model Display
YES: Move to 2.
2. Clear Completion
After flashing twice,
Back to model display
BACK
BACK
38