ZKTeco F18I User Manual page 46

door is closed normally.
Door sensor alarm: When abnormal door sensor state is detected, alarm
will be given off after some time. This time is door sensor alarm.
（effective value: 1～99 seconds)
Alarm count: When the failed press times reach the set times, alarm
signal will come out.（effective value 1～9 times)
NC time zone: Set time zone for access control NC. Nobody can unlock
during this time zone.
NO time zone: Set time zone for access control NO. The lock is always
in enabling state during this time zone.
Whether holiday is effective: Define time zone for NO or NC. Whether
the time zone set in time zone is effective.

Notice: 1) when time zone is set for NO or NC, please set door
sensor mode as "None", or alarm signal may come out during
time zone of NO or NC.
2) If time zone of NO or NC has no definition, the device
will prompt it and add the definition in time zone setting.
Operation:
Press Menu -> User Management -> Access Setting -> Access Control
Parameters:
2. User Management
- 41 -